SmartGen案例 | 48台250kW天然气发电机组并联——HGM9510N应用案例

HGM9510N发电机组并联控制器——用于多台同容量或不同容量的发电机组的手动/自动 并联系统以及适用于单台发电机组恒功率输出和市电并网，实现发电机组的自动开机停机、并联运行、 数据测量、报警保护及“三遥”功能。控制器采用大屏幕液晶(LCD)图形显示器，可显示中文、英文及其他多种语言，操作简单，运行可靠。

01

48台天然气发电机组并联应用案例

客户某厂区处于野外，用电负荷较大却没有市电，但有伴生天然气。根据经济性可靠性等多方面考虑，选用48台250kW天然气机组并联发电，配备HGM9510N发电机组并联控制器为厂区提供可靠电源。

此厂区48台并联机组分成2组，分别带设备。每个集装箱装4台机组，一组6个集装箱。该项目使用HGM9510N并联控制器，若客户需要2组48台发电机组并联同时运行亦可实现。

HGM9510N并联控制器具有控制GOV和AVR的功能，可以自动同步及负荷均分，和装有HGM9510N等系列控制器的发电机组进行并联。控制器准确监测发电机组的各种工作状态， 当发电机组工作异常时自动从母排解列，关闭发电机组，同时将故障状态显示在LCD上。控制器带有SAE J1939接口，可和具有J1939接口的多种电喷发动机ECU(ENGINE CONTROL UNIT)进行通信。

02

应用现场

众智科技，让控制更智能！

往期推荐

Case | 48 250kW Gas Gensets Paralleling—HGM9510N Application

HGM9510N genset parallel controller is used for manual/auto parallel system of gensets with same or different capacity, and single genset constant power output and mains grid-connection, thus realizing genset auto start/stop, parallel running, data measurement, alarm protection and “three remote” functions. It adopts LCD graphic display and has Chinese, English and other languages, which is easy to operate and reliable to run. 

01

48 Gas Gensets Paralleling Application

A factory of the customer is located at the field, with large power load but no mains and with associated natural gas. According to the economic reliability and other considerations, 48 250kW gas units are selected to generate power in parallel, and HGM9510N genset parallel controller is equipped to provide reliable power for the factory. 

48 paralleled units in this factory are divided into 2 groups with equipment. Each container holds 4 units, a group of 6 containers. This project adopts HGM9510N parallel controller, it can also be realized if the customer requires 2 sets of 48 gensets to run in parallel. 

HGM9510N parallel controller has GOV and AVR control function, can automatically synchronize and share load, parallel with genset equipped with HGM9510N series controllers. It can accurately monitor genset various working status. When genset is abnormal, it will automatically split from the busbar and stop the genset, meanwhile display the fault status on the LCD. The SAE J1939 port enables controller to communicate with various ECU (ENGINE CONTROL UNIT) with J1939 port. 

02

Application Site

SmartGen, making control smarter!

Wonderful reading in the past

www.smartgen.com.cn